2.      Once you have downloaded and installed libomv you might want to create a shortcut on the desktop to the most frequently used tool in the toolbox, the TestClient, located in the bin folder.

3.      A full list of all the TestClient commands can be found below, but for now the simple logging in to a grid procedure will be explained:

Start the TestClient, a DOS-like window will open. Use the login command, which has the format: login firstname lastname password [simname] [loginuri]. For example,

login Fred Flinstone yabadabadoo  http://myopensim.dyndns.org:9000

If you wanted to log into a grid, but into a particular sim or region, then use:

login Fred Flinstone yabadabadoo Bedrock  http://myopensim.dyndns.org:9000

Notes:
i) If you do not specify a loginuri then TestClient will use the default address for SL.
ii) Be patient, it usually takes a few seconds for commands to complete, and you often have no indication that the command is working in the background until it completes.
3. Although the TestClient says 'Type help for a command list' it will not work, until after you have logged in an avatar.

2.      Login to your Opensim with TestClient using the procedure above. Make sure you log into the same sim or region where the objects are rezzed. If this is not the case then you can teleport there, by using the goto command:

goto Bedrock/100/100/30

3.      Perform a scan for the rezzed objects using the findobjects [radius] command:

findobjects 20
(that will find all rezzed objects within a 20m radius, and provide a list of all objects, with their UUIDs).

4.      Copy the list of objects and Paste the results into Notepad (just so you can copy/paste the UUIDs easier, but see Note below).

5.      Objects can now be exported by using the export [UUID] [filename] command, eg:

export 50680f90-4e1d-11e0-b8af-0800200c9a66 barstool.xml

Notes:
a) To Copy/Paste in the DOS-like cmd window see this How-to:
b) The barstool.xml file will saved in the bin folder.